The potential to have the most modular blowgun on Earth is insane here, you could add a belt-fed option, drum mag, laser pointers or barrels, I might learn how to get into this myself after watching this vid now :]
@@zanderdejah I already replied to this, but youtube deleted it, so im gonna explain it again: dieseling is when you put something flammable such as petrolium jelly on the back of a projectile to make it shoot faster
@@lpburke86 alot of factors will likely affect the results but for my particular build, I can easily get 30 feet of range with about 6 inches of drop from my horizontal aim point
It is possible to increase the distance, just change the shape of the darts so you don't need the cartridge simulation and this way you could close the side where the cartridges come out. This would make the dart take up more pressure as the CO2 would have fewer escape points.
Hello ! I know you didn't make the darts and that they are available to buy. I am asking how the cases that these darts are loaded into and then loaded into the magazine are made. It's about the cases that are put into the magazine. The cases that the darts go into. That would be very interesting. If the sleeves were longer, longer darts with flat blades - SPITZE.
@NextLevelRC47 not sure RUclips will let me comment with links but it was this: Genuine Innovations G20310, Ultraflate, Bicycle CO2 Inflator, Weight 62g, Green and Black a.co/d/6O8fJzN
![[REVIEW] Shellington Kirin | AWESOME Sniper Rifle | Shell Ejecting!](/img/1.gif)
The potential to have the most modular blowgun on Earth is insane here, you could add a belt-fed option, drum mag, laser pointers or barrels, I might learn how to get into this myself after watching this vid now :]
@@KenshiSri belt feed mechanism is next on my list :)
Well done, looks good and appears to work well.
Super nice design!
That's sick bro you could totally do a semi automatic one using some pneumatic valves.
Sooooo coooool
Yeah.... Soooo I'm gonna need one of these haha
Thats the coolest thing i've seen so far
recommendation: use compressed air tanks instead of c02 because air actually allows you to "diesel" your projectiles
@dudewhodoesstuff2 i don't have access to an air compressor but i would have definitely used that if i did. What do you mean by "diesel"? Sounds rad 🤘
@@zanderdejah I already replied to this, but youtube deleted it, so im gonna explain it again: dieseling is when you put something flammable such as petrolium jelly on the back of a projectile to make it shoot faster
Imagine those are tranq darts and the rifle is attached to a larger co2 tank on your back 👍🏼
What material is the barrel? And wow parts all sound smooth 👌
this is jenius idea
I subscribed
Perfect stealth weapon Lol, kinda reminds me of the syringer for fallout 4
The kid : I think I have lobotomy
Can u make an assembly guide video cus tye assembly guide on the file isnt clear for the shell ejecting small piece
How much pressure does it take to run it? How many shots do you get from 1 cylinder?
Not sure about the PSI but using a standard 20 gram CO2 cartridge gets me between 15 and 20 shots at full power
@@zanderdejah What kind of range does it get off those little cartridges?
@@lpburke86 alot of factors will likely affect the results but for my particular build, I can easily get 30 feet of range with about 6 inches of drop from my horizontal aim point
@@lpburke86 Im using those numbers as that's the length of my hallway and I've shot down it quite a few times :)
It is possible to increase the distance, just change the shape of the darts so you don't need the cartridge simulation and this way you could close the side where the cartridges come out. This would make the dart take up more pressure as the CO2 would have fewer escape points.
Is it possible to recreate this but with different material instead of using a 3d printer?
Hello. Can this be modified/converted into pistol form?
Yea just remove the stock and use a shorter barrel
Can you make a 3D printed airbow
hye awesome.. but if let say i print the stl.. what other things i need other than co2 catridge? how about the valve n trigger mechanism?
Click on the link in the description, theres a list of every part you need as well as links to where you can buy them
How to make it bro?
Hello!
How did you make the shafts for the darts?
Greetsiel Sven
I didnt make these darts, theyre for blowguns. You can purchase them online, I believe theyre called "Venom Blowgun Darts"
Hello !
I know you didn't make the darts and that they are available to buy.
I am asking how the cases that these darts are loaded into and then loaded into the magazine are made.
It's about the cases that are put into the magazine.
The cases that the darts go into.
That would be very interesting.
If the sleeves were longer, longer darts with flat blades - SPITZE.
I comming Form Berlin- Germany . I speak Not good english . Sorry
@svenscholzke3327 oh ya the shells were 3d printed as well. Its all up on the thingiverse link
Best Greet Sven
Please try firing nerd darts.
Can you make Assembly video plss man plssss It's been a year for this
god if this was sabott..
I wonder... Can you turn a paintball gun into a semi auto .22 air rifle?
Can you poet a tetorial how to buld the gun end hou the trigger is working please
Video description contains the link to an assembly tutorial
@@zanderdejah were doe i get the descriptoon
Just to here:
www.thingiverse.com/thing:4795357
您好，请问有图纸和组装过程吗
Stl link or buy page for us 3d printers
Link to the STLs added in the description
hey what is a stL?
Best thing too is that it’s less then 12ft pounds energy so it’s legal in uk hahahaha
Can you leave me a link to the bike pump? im planning on building the gun
@NextLevelRC47 not sure RUclips will let me comment with links but it was this: Genuine Innovations G20310, Ultraflate, Bicycle CO2 Inflator, Weight 62g, Green and Black a.co/d/6O8fJzN
?
?
你好 可以发布一个安装视频吗