This is not the right fastening, over time the bolt will come out due to strong impacts. It would be best to hammer in the head, then hammer in the glue from above with the same wood, then leave it in water for a day and here is the fastening for a century
Water swells and crushes the wood fibers. Never a good idea to soak tool wood in water. Handle should be well oiled around insertion. Wood wedge is best, sealed with oil and even pitch. Nothing should extend above the head. Imo
@@enjoyenjoy5721 Well, in America yes, but in other countries a hammer is a quarter of a day's work, but repairs are cheaper and more reliable if you have golden hands.
Longer screw that goes much deeper and also a retaining ring on top that goes over the hammer. Could put some one way teeth on the shaft as well that lock it in place.
Just wedge it. Schade das du so tust als wenn du ahnung hättest oder gute Ideen, aber es ist alles von vorne bis hinten quatsch. Vlt sollte man sich eingestehen wenn man keine ahnung hat und eigentlich nur rumbastelt wie ein Azubi 😂😅
This is not the right fastening, over time the bolt will come out due to strong impacts. It would be best to hammer in the head, then hammer in the glue from above with the same wood, then leave it in water for a day and here is the fastening for a century
Next year ! 😂
Water swells and crushes the wood fibers. Never a good idea to soak tool wood in water. Handle should be well oiled around insertion. Wood wedge is best, sealed with oil and even pitch. Nothing should extend above the head. Imo
or just buy a new one. All that hasle to repair a hammer that you can't trust 100%
@@enjoyenjoy5721 Well, in America yes, but in other countries a hammer is a quarter of a day's work, but repairs are cheaper and more reliable if you have golden hands.
柄を鉄パイプに変更して溶接してください。抜けない折れない😮
Or just use a wedge
exactly liek its always been done... dont need to fuck around so much lol
Вот он... Голос разума! 👍
Thanks ❤❤
Слишком просто, за дорого не продать.
Wedge is the only way
I'm buying a new hammer for $12
Omg I can't get this time back
Good job 😊
Glad you liked it 👍❤️
No not good job, don't do this.
Schraube und Arbeitszeit kosten mehr als der hammer wert ist🤣🤣🤣🤣🤣🤣🤣
Нет уж, лучше саморезами чем пол дня делать это 😂
Ещё можно от стойки амортизаторов взять металлическую трубу и вставить туда вместо дерева и заварить его. До сих пор пользуюсь таким молотком )))
Buy a new winners hammer, and the correct fasteners.
AMO, YO EL OTRO DIA LO HICIMOS CON MI PAPA
Лучше всего клин забить, а там где поточили при первом ударе сломается ручка
Shouldn't you wedge that instead....
I actually have some hammers that are loose and I even have some of these concrete anchors.
Just use a wedge, don't be stupid.
Нужно было и сверлить также в сторону, чтобы сверло вылезло, чтобы получилось также как с гвоздем
आपका यह तरीका बहुत अच्छा लगा हमको❤❤🎉🎉
बहुत खुशी हुई! 😊🤝❤️
Интересная идея ✊.
0.0001% of viewers will apply this.
Гайку сверху собьёшь гвоздём и болт с гайкой вылезет! Шляпку болта утопи и торцевой насадкой закрути вглубь вровень!
He'll no! Just cut it and place a wadge into the handle.
Lo già scritto e lo riscrivo ancora i manici vanno piantati dal fondo e non dalla cima del manico...pessimo sistema da non rifare di sicuro
Longer screw that goes much deeper and also a retaining ring on top that goes over the hammer. Could put some one way teeth on the shaft as well that lock it in place.
Kauf dir nen gescheiten Hammer, brauchst dann nicht pfuschen.
PROFECIONAL
Sellotape wrapped around it also works
Madre mía, que vale 2€ un martillo.....
Thanks you ❤❤
y dónde esté una cuña de madera de haya o una moneda vieja...
Fabrikadan böyle çıksada bizi yormasanız bu kadar malzemeyi nereden bulalım
Порнография.
Причем второй способ ничуть не лучше первого.
Thanks you ❤
Viel zu aufwendig. Stiel auf Schlitzen und mit einem Keil verkeilen.
Elegant fit 🔨
Glad you liked it 👍😉❤️
Noch nie einen Hammer geschäftet was?
По ходу кто это делает не в курсе лафхаков старины😂
Warum den Holzstiel unnötig dünner machen, als unbedingt nötig?
Fachkräfte halt🤷
EXTRA Strong😁!!!
Я когда вижу не подстриженные ногти у мужиков сразу же листаю не смотрю что они делают
Nice tip🎉
Glad you liked it 👍❤️
Or just buy a hammer…
WTF is he doing? Just wet it and hammer in a head wedge
Costa più il tassello del martello . . . .
Thanks ❤
На рукоятку одеваете кусок велосипедной камеры и на него одеваете молоток и забываете о проблемы вылета молотка.
What bollox. Use a wedge!
Az első módszer vólt a legjobb!!!!😂😂😂😂😂👍👍👍
Я самовыразился, но в школе уроки не учил.
Yeah either do all that or just go buy a hammer for fifteen dollars
Inertia & a wedge, less f*cking around.
Alles ganz normal. Ich mache das regelmäßig
Ппц какой бред, всю жизнь клин ставили, и не извращались так😂
T’achète un marteau à 3 euros et basta
You'll knock the nut off with a nail and the bolt with the nut will come out! Sink the bolt head and twist the end nozzle flush!
You'll knock down the nut from above with a nail and the bolt with the nut will come out! Sink the bolt head and twist the end nozzle flush!
Wozu gibt es Metallkeile ?
Luluwag katagalan ang bolt lalo nat ginagamit yan yong vibration bawat hampas
Тазик с водой не пробовал ? Говорят и слабоумие лечит
meglio saldare il tutto con elettrodi a faggio evaporato
Thanks you
гениально Ватсон
فكرة حلوة ومفيدة لتثبيت المطرقة 👍🏻✏🔨🪚
🤝 شكراً جزيلاً 🙏❤️
Cambiare martello? No eh....
как найти себе проблему на ровном месте
Bro we don't have too much money
Still wrong lol 😂
Ou Leroy Merlin 😅
Heeeeyyyyy!!! Vaya trabajo para ser una chapuza, acabará mal.
ya está mal desde el principio
I usually watch porn so i dont need this information
just buy a new one lol
Load of nonsense
Just wedge it. Schade das du so tust als wenn du ahnung hättest oder gute Ideen, aber es ist alles von vorne bis hinten quatsch.
Vlt sollte man sich eingestehen wenn man keine ahnung hat und eigentlich nur rumbastelt wie ein Azubi 😂😅
くさびを知らないのか？
❤❤❤❤
Or just buy a new hammer
Water
Most ridiculous thing I've ever seen. Waste of time money and resources.
I don't like this solution
그냥 철물점 가서 하나 사~
Great idea sir ❤
Too much effort.
Эпидерсионизм😢
ضمان مدى الحياة
No no no omg no
So sollte man es nicht machen
Just no 🤦
しち面倒臭・ハンマーぐらい買おうよwww
Чиназес
Hell NO
Jist not
これはそのうちに割れます
Nem jó!
顛老
🥱
Nooooooooo
ridiculous
Хороший способ крепежа👍
Thanks sir ❤
No, just noooooooo 🤦♂️🤦♂️🤦♂️🤦♂️
What a load of rubbish